Constructing the base for the Homestead at the base of Three Chop Ridge

In the middle of the pic below you can see a small house and to its left the outline of a tunnel portal:

Wide angle of Three Chop Ridge

Wide angle of Three Chop Ridge

The homestead is sitting on a platform. This platform is strong enough to be stood upon so that we can reach the top of the ridge. The platform was the last piece to be installed of theThree Chop Ridge frame. The pics below show the construction in progress.

Plwood for the homestead platform

Frank Davis bringing in the plywood from which the platform will be cut after preliminary fitting. Tony Phillips is watching.

Scibing the plywood for the homestead platform

Chuck Whitlock scribing the plywood for the next cut. Frank Davis is holding.

Fitting track on the homestead platform

Tony Phillips and Frank Davis helping lay the track on the platform


Northwest corner of the layout aka Three Chop Ridge – More pics by Mike Aplet

Work on Three chop Ridge continues apace as these recent pics from Mike Aplet show. Why is it named “Three Chop Ridge”? Because, it was an archaeological dig on Three Chop Ridge of a Pomo Indian village that, ultimately, led to the discovery of the wreck of the Frolic which in turn led to the opening up of the Redwood lumber industry along the Mendocino Coast.

G Scale model of Three Chop Ridge

Three Chop Ridge in the NW Corner of the layout

Building trees on Three Chop Ridge G scale model train layout

Tree trunks ready for tree tops

Mike Aplet in front of Three Chop Ridge

Mike Aplet in front of Three Chop Ridge. The hill rises some 10 feet from the floor